ICC, ASHRAE Outline Roles to Consolidate IgCC and 189.1 in Response to Call from Industry
Click here for more information >
1791 Tullie Circle, NE • Atlanta, GA 30329-2305•404-636-8400 • www.ashrae.org
March 30, 2016
Contact: Jodi Scott
Lighting Requirements for High Rise Dwellings Proposed for Energy Standard
ATLANTA – A proposal that would set lighting requirements for high-rise dwellings in the energy standard published by ASHRAE and the Illuminating Engineering Society (IES) is open for industry comment.
Fourteen addenda to ANSI/ASHRAE/IES Standard 90.1-2013,Energy Standard for Buildings Except Low-Rise Residential Buildings,are open for public comment from March 25 until April 24, 2016. To comment or learn more, visitwww.ashrae.org/publicreviews.
Among them is addendumdo. Currently, lighting in dwelling units in high-rise buildings is exempt in both Standard 90.1 and ANSI/ASHRAE/IES Standard 90.2,Energy Standard for Low-Rise Residential Buildings.
“In general, lighting within someone’s personal dwelling unit (home) has been exempt because it was not considered commercial, which is the focus of 90.1,” Eric Richman, chair of the standard’s lighting subcommittee, said. “The International Energy Conservation Code with its residential component and other similar state codes developed some basic requirements for dwelling unit lighting several years ago that addressed product efficacy. At the time, it was difficult to develop requirements that would ensure savings and still be practical for personal spaces. Over time, the lack of dwelling unit requirements in 90.1 presented a potential gap in energy savings. These new requirements would set efficacy minimums and/or controls for the lighting in dwelling unit spaces covered in the standard’s scope, which includes multi-family structures of four stories or above.”
The proposed requirements are similar to those in the U.S. Environmental Protection Agency’s ENERGY STAR program for high efficacy lighting. They are simplified to apply to dwelling units in commercial buildings and to support compliance as well as being conservative to allow design flexibility. The proposed efficacy requirements will effectively eliminate the use of incandescent/halogen sources as well as less efficacious products in the compactfluorescent (CFL) andlightemitting diodes(LED) categories.
Also among the addenda open for public comment is addendumei, which tightens requirements to ensure that non-historic elements or areas of buildings meet the applicable requirements. Currently, the historic building exemption can allow for exempting the entire building, including parts that may be new additions or not part of the historic element, according to Richman.
Other addenda open for public comment until April 24, 2016, are:
ASHRAE, founded in 1894, is a global society advancing human well-being through sustainable technology for the built environment. The Society and its more than 50,000 members worldwide focus on building systems, energy efficiency, indoor air quality, refrigeration and sustainability. Through research, standards writing, publishing, certification and continuing education, ASHRAE shapes tomorrow’s built environment today. For more information, visit www.ashrae.org/news.